JUKI AMS-210E Series Engineer's Manual page 168

A
B
C
D
10) Method of continuous operation
1. Display of the continuous operation screen
When the continuous operation button
pressed on the check program screen, the continu-
ous operation screen is displayed.
2. Continuous operation
In the continuous operation screen, the continuous
operation mode is set up.
B : Intervals of operation (rest time)
C : Origin retrieval at the end of sewing
0 : No
1 : Every 100 runs
2 : Every time
D : Presser lifting, lowering (frequency)
When the READY key
operation is started.
If the READY key is turned ON again in the middle of
continuous operation, continuous operation is
stopped.
– 163 –
(A) is
is turned ON, continuous