JUKI AMS-210E Series Engineer's Manual page 113

B
G
C
E
L
3. Setup procedures
A
(1) IP-400
1) Display of the port I/O screen
When the
about 6 seconds and the page changeover button
displayed. When this button is pressed, the port I/O
setup screen is displayed.
2) Selection of the port I/O screen
For port I/O setup, four I/O setup screens are avail-
able. A required function number can be set on a
F
relevant screen.
B : Output number setting
C : Input number setting
D : Virtual I/O number setting
E : Switch operation prohibition setting
Setup screen changeover is possible with the right
and left scroll buttons
top of each screen.
D
– 108 –
switch is continuously pressed for
is pressed, the port I/O setup button (A) is
(F) located on the