Adjusting The Needle Thread Clamp Notch - JUKI AMS-210E Series Engineer's Manual

(42) Adjusting the needle thread clamp notch

1. Needle thread clamp notch R position
• When the needle thread clamp link complete
clamp support plate complete
the needle thread clamp
for H type.
S Type
21mm
B
2. Needle thread clamp notch F position
• When the needle thread clamp link complete
clamp support plate complete
the needle thread clamp
for H Type.
S Type
23mm
B
Standard Adjustment
and the needle thread clamp
and the needle thread clamp base
D
Contact
A
and the needle thread clamp
and the needle thread clamp base
C
E
Contact
is pressed in Direction A, and Part B of the needle thread
begins to open, the distance between
becomes 21mm for S Type and 16.5mm
H Type
16.5mm
B
is pressed in Direction C, and Part B of the needle thread
begins to open, the distance between
becomes 23mm for S Type and 21mm
H Type
21mm
B
– 65 –
D
Contact
A
C
E
Contact