Second Thread Tension Connection / Disconnection - JUKI AMS-210E Series Engineer's Manual

(21) Second thread tension connection / disconnection

Procedures of disassembling
1. Loosen the set screw .
2. Remove three setscrews and take out the thread tension cap .
3. Remove the nut and the tension releasing pin adjusting collar . Then take out the thread tension disc
pressing plate and three thread tension disc return springs .
4. Pull out the second thread tension to remove it. (Arrow )
A
5. For reassembly, follow the steps of 4. to 1. above.
A
– 35 –