Specifications - JUKI AMS-210E Series Engineer's Manual

1. Specifications

No. Model name
AMS-210EHS
Item
Sub-class
1 Sewing area X-Direction (right, left) 130mm; Y-Direction (forward, backward) 60mm
2 Max. sewing speed
3 Stitch length
4 Feed motion of feeding frame
5 Needle bar stroke
6 Needle
7 Method to lift feeding frame Pulse motor
8 Feeding frame shape Right and left united
9 Lift of feeding frame Standard 25mm, Max. 30mm
10 Intermediate presser stroke
11 Lift of intermediate presser
12 Intermediate presser
DOWN position variable
13 Needle thread clamp device H type
14 Needle thread tension
15 Hook
16 Lubrication
17 Lubricating oil
18 Grease
19
Memory of pattern data
20 Temporary stop facility
21 Enlarging/Reducing
function
22 Enlarging/Reducing
method
23 Sewing speed limitations
24 Pattern selector facility
25 No. of sheets counter
26 Sewing counter
(Bobbin thread counter)
27 Memory back-up
28 2nd origin setting facility
29 Sewing machine motor
30 External dimensions
31 Weight (gross weight)
32 Power consumption
33 Working temperature/humidity
34 Supply voltage/frequency
35 Air pressure used
36 Air consumption
37 Needle highest position
stop facility
(Caution) Grease type, refer to (3) Greasing • lock-tite parts of [10] Maintenance
AMS-210ESS AMS-210EHL
1306
Right and left separated
S type H type
1. Penetration No. 2 lithium grease, 2. Templex N2, 3. Juki Grease A, 4. Juki Grease B (Caution)1.
Allows a pattern to be enlarged or reduced on the X axis Y axis independently when sewing a pattern.
Pattern enlargement / reduction can be done by increasing / decreasing either stitch length or the number of stitches.
(Only increase/decrease of stitch length when pattern button is selected and CP-20 is used)
In case of a power interruption, the pattern being used will automatically be stored in memory.
Using jog keys, a 2nd origin (needle position after asewing cycle) can be set in the desired position within the sewing area.
1,200mm (W) x710mm (L) x 1,200mm (H)
(Excluding thread stand)
Machine head : 69kg, Control box : 16.5kg
—
—
Application
AMS-210ESL AMS-210EHL AMS-210ESL
1510
X-Direction (right, left) 150mm; Y-Direction (forward, backward) 100mm X-Direction (right, left) 220mm; Y-Direction (forward, backward) 60mm
2700rpm (when sewing pitch is 3mm or less)
0.1 to 12.7mm (Min. resolution : 0.05mm)
intermittent feed (2-shaft drive by stepping motor)
41.2mm
S type: DP x 5 # 14, H type: DP x 17 # 18
Standard 4mm (0 to 10mm)
20mm
Standard 0 to 3.5mm (Max. 0 to 7.0mm)
S type H type S type
Active tension (electronic thread tension control mechanism)
2-fold semi-rotary hook
Plane part: grease, hook part: minute volume lubrication (tank type)
JUKI NEW Defrix oil (equivalent to ISO VG32) (Lubrication system)
EEP-ROM, Smart media
• EEP-ROM : Max. 200 patterns (Max. 20,000 stitches/pattern)
• Smart media : Max. 999 patterns (Max. 50,000 stitches/pattern)
Used to stop machine operation during a stitching cycle.
Scale : 1% to 400% times (0.1% steps)
200 to 2,700 rpm (Scale : 100 rpm steps)
Pattern No. selection method
(EEP-ROM : 1 to 200, Smart media : 1 to 999)
(CP-20 is the scroll type.)
Up/Down method (0 to 9,999) (IP-400 only)
Up/Down method (0 to 9,999)
The set 2nd origin is also stored in memory. (IP-400 only)
Servomotor 550W
1,200mm (W) x770mm (L) x 1,200mm (H)
(Excluding thread stand)
Machine head : 73kg, Control box : 16.5kg
500VA
Temperature: 5-35°C, Humidity: 35-85% (no condensation)
Rated voltage ±10% 50 / 60Hz
Standard: 0.35 to 0.4MPa, Max. 0.55MPa
1.8dm 3 /min (ANR)
After the completion if sewing, the needle can be brought up to its highest position.
– 1 –
AMS-210EHL AMS-210ESL
2206
Air
Right and left united
Max. 30mm
H type S type
1,200mm (W) x710mm (L) x 1,200mm (H)
(Excluding thread stand)
Machine head : 75kg, Control box : 16.5kg
AMS-210EHL AMS-210ESL
2210
X-Direction (right, left) 220mm; Y-Direction (forward, backward) 100mm
H type S type
1,200mm (W) x770mm (L) x 1,200mm (H)
(Excluding thread stand)
Machine head : 77kg, Control box : 16.5kg