JUKI AMS-210E Series Engineer's Manual page 98

[(5) List of feeding frame and pedal setup]
For pulse motor driving
Setup Contents
0 United clamp
United clamp,
1
2-step stroke
United clamp,
2
2-step stroke
United clamp
2-step stroke
3
4 to 99 United clamp
For air driving
Setup Contents
0 United clamp
Right/left separation Lowering enabled
1 clamp
Right/left separation Lowered from the
clamp
2
Right/left separation Lowered from the
clamp
3
United clamp,
4 2-step stroke
Right/left separation Lowering enabled
clamp,
5 left 2-step stroke
Right/left separation Lowered from the
clamp, left 2-step
6 stroke
Right/left separation Lowered from the
clamp, left 2-step
7 stroke
8 to 99 United clamp
Preference
– Lowered to the bottom by Pedal 1.
Lowered to the intermediate position by Pedal 1 (right).
–
Lowered to the bottom by Pedal 2 (left).
Lowered to the intermediate position by Pedal 1.
–
Lowered to the bottom by the start pedal to start sewing.
Lowered to the mid-point position by the first action of
the presser pedal 1.
–
Lowered to the bottom position by the second action.
Raised by the third action.
– Lowered to the bottom by Pedal 1.
Preference
– Lowered to the bottom by Pedal 1.
The right feeding frame is lowered to the bottom by
from the right or left Pedal 1 (right).The left feeding frame is lowered to the
bottom by Pedal 2 (left).
The right feeding frame is lowered to the bottom by
right. Pedal 1 (right), then the left feeding frame is lowered
to the bottom by Pedal 2 (left). The left feeding frame
is not lowered unless the right feeding frame has been
lowered.
The left feeding frame is lowered to the bottom by
left. Pedal 2 (left), then the right feeding frame is lowered
to the bottom by Pedal 1 (right). The right feeding frame
is not lowered unless the left feeding frame has been
lowered.
The feeding frame is lowered to the intermediate
– position by Pedal 2 (left), then lowered to the bottom
by Pedal 3 (left treading-on).
The right feeding frame is lowered to the bottom by
from the right or left Pedal 1 (right), then the left feeding frame is lowered
to the intermediate position by Pedal 2 (left intermedi-
ate). The left feeding frame is lowered to the bottom by
Pedal 3 (left treading-on).
The right feeding frame is lowered to the bottom by
right. Pedal 1 (right), then the left feeding frame is lowered
to the intermediate position by Pedal 2 (left intermedi
ate). The left feeding frame is lowered to the bottom by
Pedal 3 (left treading-on). The left feeding frame is not
lowered unless the right feeding frame has been lowered.
The left feeding frame is lowered to the intermediate
left. position by Pedal 2 (left intermediate), then lowered
to the bottom by Pedal 3 (left treading-on). Since then,
the right feeding frame is lowered to the bottom by
Pedal 1 (right). The right feeding frame is not lowered
unless the left feeding frame has been lowered.
– Lowered to the bottom by Pedal 1.
– 93 –
Explanation
Explanation