Table of Contents
Advertisement
(5) Removal of main shaft motor and coupling
1. For removal of the main shaft with the coupling,
Loosen 2 setscrews
motor.
2. For removal of the coupling
side.
(Caution) The screw (hole) that can be seen first is No. 1 setscrew
in the forward direction
tighten No. 1 setscrew
Procedures of disassembling
on the main shaft side of the coupling
from the main shaft motor
. For loosening, loosen No. 2 setscrew first, and for tightening,
A A A A A
first.
No. 2 setscrew
A
, and remove 4 setscrews
, loosen 2 setscrews
No. 1 setscrew
– 10 –
on the main shaft motor
when the main shaft
No. 1 setscrew
0.7mm
securing the
is turned
Advertisement
Table of Contents
