JUKI AMS-210E Series Engineer's Manual page 137

5. Program rewriting (For the CP-20)
(1) When the power is turned on with the
is started. When the rewriting mode of the simplified panel program is started, the Y scale LED is lit up.
When the power is turned on with the
When the rewriting mode of the main program is started, the max. number of rotation LED is lit up.
When the power is turned on with the
When the rewriting mode of the servo program is started, the tension LED is lit up.
: Panel program
(2) Using the key, select the program file for the panel, which is kept in the smart media. In regard to the file
display, the key can be used for changeover between the RVL display and the model code display.
: RVL display
For RVL display, five digits of R (1 digit), V (2 digits), and L (2 digits) are displayed.
The non-display portion (RVL + α) can be displayed with the use of the
Example) RVL 01-03-02
For model code display, the five continued characters from the head are displayed.
The model code of the non-display portion can be displayed with the use of the
Example) AMS-210E
(3) When the key is pressed, writing of the simplified panel program is started. When Power OFF is displayed,
writing has been completed.
When the power supply is turned on again, normal operation is recovered.
key kept pressed, the rewriting mode of the simplified panel program
key kept pressed, the rewriting mode of the main program is started.
key kept pressed, the rewriting mode of the servo program is started.
: Main program
: Model code display
– 132 –
: Servo program
and keys.
and keys.