Loading The Emulation Module - SATO S84ex Operator's Manual

5 Emulation Mode
5.1.1

Loading the Emulation Module

In the emulation module loader, user can select to load the standard or emulation module. The valid
downloaded emulation module is listed on the display. A total of four emulation modules can be
downloaded to the printer memory. However, it is subject to the download area availability and other
prevailing condition. The printer will not support SBPL command data printing while using the emulation
module.
The flowchart shows the sequence of the setting screens for loading the emulation module. The table
describes each setting screen in detail.
MODULE LOAD
Select the module to be loaded to the printer using the
then press the
• STD FIRMWARE: Load the standard firmware.
• SZPL (XX.XXX): Load the downloaded SZPL emulation firmware.
• SDPL (XX.XXX): Load the downloaded SDPL emulation firmware.
• SIPL (XX.XXX): Load the downloaded SIPL emulation firmware.
Note
The XX.XXX is the module version information.
222 S84-ex/S86-ex Operator Manual
button
button
3 beeps
Printer
reboot
ENTER button.
Select LOAD
+ button
Emulation icon shows if
emulation module is
loaded.
/
buttons and