SATO S84ex Operator's Manual page 165

SELECT DUMP DATA
Select the data for printing the hex dump.
• RECEIVE DATA: Print the hex dump of the received data.
• RECEIVE BUFFER: Print the hex dump of the received print data (one
item).
• INTERNAL DATA: Print the setting values of the internal buffer.
• SEND BACK DATA: Return the received data (one item) to the data
port.
Note
RECEIVE BUFFER and SEND BACK DATA cannot be selected if there is
no received data.
HEX DUMP
Set the print and save functions of the hex dump.
• PRINT: Only print the received data.
• SAVE: Save and print the received data.
HEX DUMP
Set the print width of the hex dump.
• NORMAL: Print the received data with sixteen bytes in one line.
• HALF: Print the received data with eight bytes in one line.
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
163