SATO S84ex Operator's Manual page 84

4 Operation and Configuration
DATA PORT
Select the connected interface for use with the data port.
The options are as follows:
• USB
• LAN
• RS-232C
• IEEE1284
• Bluetooth
• WLAN
Note
• Bluetooth shows even if a Bluetooth adapter is not connected.
• WLAN shows only if a WLAN unit is installed.
• You cannot select the interface that has already been set for the SUB
PORT.
• The setting will be effective only if you power on the printer again.
SUB PORT
Select the connected interface for use with the data port.
The options are as follows:
• USB
• LAN
• RS-232C
• IEEE1284
• Bluetooth
• WLAN
• NONE
Note
• Bluetooth shows even if a Bluetooth adapter is not connected.
• WLAN shows only if a WLAN unit is installed.
• You cannot select the interface that has already been set for the DATA
PORT.
• The setting will be effective only if you power on the printer again.
IGNORE CR/LF
Ignore or acknowledge the CR/LF code of the received data.
• YES: Ignore the CR/LF code.
• NO: Do not ignore the CR/LF code.
Note
Shows only if the DATA PORT is selected.
82
S84-ex/S86-ex Operator Manual