SATO S84ex Operator's Manual page 197

4 Operation and Configuration
SITE SURVEY START
This is the initial screen of the site survey mode.
Press the ENTER button to start the site survey.
If Infrastructure is selected in the WIRELESS MODE of the WLAN
interface setting, the printer goes to the SITE SURVEY SEARCHING
screen.
If Ad Hoc is selected in the WIRELESS MODE of the WLAN interface
setting, the printer goes to the Ad Hoc mode screen.
SITE SURVEY SEARCHING
The printer is acquiring information necessary for the site survey.
The field intensity, channel and MAC address for a maximum of sixty-four
access points will be searched.
After acquiring the information, the printer automatically goes to the next
screen.
Note
Shows only if the WIRELESS MODE of the WLAN interface setting is set
to Infrastructure.
Ad Hoc mode NO SEARCHING
This is a warning screen when the site survey mode is started if the
WIRELESS MODE of the WLAN interface setting is set to Ad Hoc.
Power on the printer again.
195
S84-ex/S86-ex Operator Manual