SATO S84ex Operator's Manual page 110

4 Operation and Configuration
AUTHENTICATION LEVEL
Set the Bluetooth authentication level.
The following options are available:
• NONE: No authentication
• Level 2-1: PIN code authentication, service level
• Level 2-2: PIN code authentication, service level
• Level 3: PIN code authentication, link level
Note
• Shows only if the Bluetooth interface is selected.
• The setting will be effective only if you power on the printer again.
PIN CODE
Set the Bluetooth PIN code.
You can enter a maximum of sixteen characters including alphabet (upper
case and lower case), numbers and symbols.
Note
• Shows only if the Bluetooth interface is selected.
• The setting will be effective only if you power on the printer again.
DEVICE NAME
Set the device name for the printer.
You can enter a maximum of twenty characters including alphabet (upper
case and lower case), numbers and symbols.
Note
• Shows only if the Bluetooth interface is selected.
• The setting will be effective only if you power on the printer again.
DISCOVERY SETTING
Enable or disable the Bluetooth detection response.
• ENABLE: Enable the Bluetooth detection response.
• DISABLE: Disable the Bluetooth detection response.
Note
• Shows only if the Bluetooth interface is selected.
• The setting will be effective only if you power on the printer again.
108
S84-ex/S86-ex Operator Manual