SATO S84ex Operator's Manual page 277

Error
No. Message
Memory full error
13
Download data
error
14
BCC check error
17
Item No. error
18
LED/Buzzer
Flashes red. The space in the memory
is not sufficient.
One long beep.
To clear the error:
Power off the printer.
Lights red. The downloaded data is
incorrect.
One long beep.
The download area is not
sufficient.
Flashes red. The BCC code of the data
to be sent (one item) is
Three short beeps. incorrect.
To clear the error:
Press the LINE
button or cancel the
print job.
Flashes red.
Sequence number of print
data (one item) is not
Three short beeps. increased by one.
To clear the error: *The sequence number is
not in sequential order.
Press the LINE
button or cancel the
print job.
Cause Countermeasure
Delete unwanted data
from the memory.
Check the downloaded
data.
Check the downloaded
data size.
Check the data to be sent
and the communication
settings.
LINE button: Continue
printing from the print data
where the BCC error
occurred.
Send the SUB command:
Clear the BCC error and
continue printing from
where it stopped.
Check the data to be sent
and the communication
settings.
LINE button: Continue
printing from the print data
where the Item No. error
occurred.
Send the SUB command:
Clear the Item No. error
and continue printing from
where it stopped.
S84-ex/S86-ex Operator Manual
7 Troubleshooting
275