SATO S84ex Operator's Manual page 158

4 Operation and Configuration
CALENDAR MONTH CODE
Set the month code for the calendar.
The setting range is from A to Z and a to z.
The default value is A-JANUARY, B-FEBRUARY, C-MARCH, D-APRIL,
-
E MAY, F-JUNE, G-JULY, H-AUGUST, J-SEPTEMBER, K-OCTOBER,
L-NOVEMBER, M-DECEMBER.
Select the month using the
/
the buttons, then press the
code.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR CASE FORMAT
Select the character format for the calendar.
• MIXED: Use upper case for the first character only.
• UPPER: Use upper case for all characters.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR CHECK
Enable or disable the calendar check function.
• ENABLE: Enable the calendar check function.
• DISABLE: Disable the calendar check function.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CHARACTER PITCH
Set the character width for printing.
• PROPORTIONAL: Print each character with a different width.
• FIXED: Print all characters with the same width.
156
S84-ex/S86-ex Operator Manual
/ buttons, select the month code using
ENTER button to confirm the month