SATO S84ex Operator's Manual page 166

4 Operation and Configuration
HEX DUMP
Set the memory for saving the hex dump data.
The file name of the data to be saved is created from "DATA_001.DAT" in
sequence.
A maximum of one hundred hex dump data can be saved.
When saving file with one hundred files already in the media, the older file
starting from the first number (001) will be overwritten in sequence.
• SD: Save data to an SD card.
• USB: Save data to a USB memory.
Note
• For installation and removal of the memory, refer to
Installing Optional Memory
• Three beeps will sound if you press the
selected memory is not installed.
ONLINE
This screen shows an online status icon if RECEIVE DATA is selected.
OFFLINE
This screen shows an offline status icon if RECEIVE DATA or INTERNAL
DATA is selected.
164
S84-ex/S86-ex Operator Manual
Section 2.8
Storage.
ENTER button when the
HEX DUMP PRINT
HEX DUMP SAVE