Sipl Emulation Mode - SATO S84ex Operator's Manual

5.4 SIPL Emulation Mode

The SIPL Emulation Mode is available when the printer is loaded with SIPL Emulation firmware. The
RFID option is not supported in this emulation firmware.
The flowchart shows the sequence of the setting screens for the SIPL emulation firmware. The table
describes each setting screen in detail.
button
* Press the
accordingly. The active arrow icons are shown on the screen.
* Pressing the
button
EMULATION MODE menu.
s
(1X), (2X) button
button
button
button
button
button
5 Emulation Mode
, , or button to select an item or set the value
button on each screen will revert to the
Shows only when the
PASSWORD input is enabled
button
button
button
button
button
S84-ex/S86-ex Operator Manual 239