SATO S84ex Operator's Manual page 230

5 Emulation Mode
VERIFYING...
The printer is verifying the module data.
The bar on the lower portion of the screen indicates the data verification
progress.
After verifying the module data, it goes to the MODULE DOWNLOAD
COMPLETED screen.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
MODULE DOWNLOAD COMPLETED
This screen shows the completion of the download.
Three beeps will sound when the module download is completed.
If downloading through INTERFACE, it will return to the DOWNLOAD
READY screen.
If downloading through SD CARD or USB MEMORY, press the
button to return to the INTERFACE SELECT screen.
READING... XX/XX
The printer is reading the module data.
The bar on the lower portion of the screen indicates the data reading
progress.
XX/XX shows the file number being read and total number of files.
After reading the module data, it goes to the WRITING... screen.
Note
Shows only if INTERFACE SELECT is set to SD CARD or USB MEMORY.
WRITING... XX/XX
The printer is writing the module data.
The bar on the lower portion of the screen indicates the data writing
progress.
XX/XX shows the file number being read and total number of files.
After writing the module data, it goes to the VERIFYING... screen.
Note
Shows only if INTERFACE SELECT is set to SD CARD or USB MEMORY.
228 S84-ex/S86-ex Operator Manual
ENTER