SATO S84ex Operator's Manual page 83

PRESS ENTER KEY
This screen reminds the user to press the
power off the printer to save the setting.
INTERFACE AUTO SELECT
Enable or disable the interface auto detection.
• ENABLE: Automatically select the connected interface.
• DISABLE: The interface is selected based on the interface setting.
Note
The setting will be effective only if you power on the printer again.
INTERFACE SETTING
Set whether or not to perform the interface settings.
• YES: Enter the PORT SELECT screen.
• NO: Enter the IGNORE CR/LF screen.
PORT SELECT
Select the port used for the connected interface.
• DATA PORT: For receiving various SBPL commands and executing
print operations.
• SUB PORT: For monitoring the printer status and connecting to
external devices.
ENTER button to change or
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
81