Download Print this page

SATO S84ex Operator's Manual page 126

Hide thumbs Also See for S84ex:

Table of Contents

4 Operation and Configuration

Function Settings

The flowchart shows the sequence of the setting screens for the function settings. The table describes

each setting screen in detail.

S84-ex/S86-ex Operator Manual

Select SETTING

button to select an item or set the value

accordingly. The active arrow icons are shown on the screen.

* Pressing the

button on each screen will revert to the SERVICE

MODE setting screen.

Shows when ENABLE is selected in EXTERNAL REPRINT,

YES is selected in REPRINT W/FEED,

REPRINT is selected in FUNCTION KEY,

or ENABLE is selected in CONTINUOUS PRINT.

Shows only if you have installed the optional RFID kit and

enabled RFID mode.

Troubleshooting