SATO S84ex Operator's Manual page 140

4 Operation and Configuration
BACKFEED OFFSET
Set the backfeed distance in LINERLESS mode.
The setting range is from 000 to 250 mm.
Note
Shows only if PRINTER TYPE in ADVANCED MODE is set to
LINERLESS.
TOTAL QTY DISPLAY
Set whether or not to show the total print quantity.
• YES: Shows the total print quantity and current print quantity.
• NO: Shows the current print quantity.
YES is selected
PLUG & PLAY
Enable or disable the Plug and play function of the printer.
• ENABLE: Enable the Plug and play function.
• DISABLE: Disable the Plug and play function.
Note
This function will affect the IEEE1284 interface connectivity because it
uses the DEVICE ID response of the IEEE1284.
138
S84-ex/S86-ex Operator Manual
NO is selected