SATO S84ex Operator's Manual page 103

BAUDRATE
Set the RS-232C baud rate.
The following baud rates are available:
• 2400 (bps)
• 4800 (bps)
• 9600 (bps)
• 19200 (bps)
• 38400 (bps)
• 57600 (bps)
• 115200 (bps)
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the printer again.
PARITY BIT
Set the RS-232C parity bit.
The following options are available:
• NONE
• ODD
• EVEN
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the printer again.
STOP BIT
Set the RS-232C stop bit.
The following options are available:
• 1BIT
• 2BIT
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the printer again.
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
101