SATO S84ex Operator's Manual page 139

RIBBON TENSION ADJUSTMENT
Adjust the ribbon tension for the backfeed if scuffing (horizontal black line)
occurs.
The ribbon is tensed when using a smaller value, and is loosened when
using a larger value.
The setting range varies depending on the head density as follows:
Head Density
203 dpi
305 dpi
609 dpi
Note
Shows only for the thermal transfer model.
THROUGHPUT
Set the interval from backfeed to forward feed or from forward feed to
backfeed.
• FAST: The interval is shortened and the throughput is improved.
• NORMAL: Use the existing interval.
Note
The printer may not operate with the FAST setting, depending on the
operating environment.
FEED OFFSET
Set the feed distance in LINERLESS mode.
The setting range is from 000 to 250 mm.
Note
Shows only if PRINTER TYPE in ADVANCED MODE is set to
LINERLESS.
Setting Range Default
Value
0 - 15 12
0 - 15 5
0 - 15 1
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
137