SATO S84ex Operator's Manual page 198

4 Operation and Configuration
SITE SURVEY INFORMATION
These screens show the information of the site survey.
In the first line on the upper screen to the right, 01 indicates the strongest
field density, 123456 indicates the last six digits of the MAC address, 01
indicates the channel in use and 18 indicates the absolute RSSI value in
dBm.
Each screen shows four access points. You can use the
toggle between screens.
A maximum of sixty-four access points can be shown.
You can show the full MAC address (twelve digits) by pressing the
buttons as shown below.
NOT FOUND AP
This screen shows when the printer cannot find an access point.
Note
Press the CANCEL button to return to the SITE SURVEY START
screen and try again.
AP PRINT SIZE
Select the print size for the site survey information.
• LARGE: Print the information with a width of 10 cm.
• SMALL: Print the information with a width of 4 cm.
AP PRINT PRESS ENTER KEY
The printer is ready to perform printing.
Press the ENTER button to start the test print of the site survey.
196
S84-ex/S86-ex Operator Manual
/
button
button
buttons to
button
/
button