SATO S84ex Operator's Manual page 86

4 Operation and Configuration
NTP IPv6 ADDRESS
Set the IPv6 address for NTP server.
The setting range is from 0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
Note
Shows only if the SNTP function is enabled.
TIME ZONE
Set the time zone.
The setting range is from -12:45 to +14:45.
Note
Shows only if the SNTP function is enabled.
ERROR NOTICE
Set whether or not to notify the SNTP function error.
• ENABLE: Shows an error notice when failing to correct the time.
• DISABLE: Does not show an error notice when failing to correct the
time.
Note
Shows only if the SNTP function is enabled.
SNMP FUNCTION
Set the SNMP function.
• ENABLE: Enables the SNMP function and goes to "SNMP setting
select" screen.
• DISABLE: Disables the SNMP function and goes to "Interface select
screen.
Note
Shows only if the LAN interface is selected.
84
S84-ex/S86-ex Operator Manual