SATO S84ex Operator's Manual page 161

LABEL SIZE ADJ HEIGHT
Specify the height of the label for rotation.
The setting range varies depending on the model as follows:
Model
S84-ex (203 dpi)
S84-ex (305 dpi)
S84-ex (609 dpi)
S86-ex (203 dpi)
S86-ex (305 dpi)
Note
Shows only if ROTATE LABEL is set to 90, 180 or 270.
IGNORE A1
Select whether or not to ignore the <A1> command.
<A1> command is to set the media size.
Refer to the Programming Reference for details of the command.
• YES: Ignore the <A1> command.
• NO: Proceed with the <A1> command.
Note
Shows only if ROTATE LABEL is set to 90, 180 or 270.
LCD POWER SAVING
Specify a period of time to light off the LCD backlight when the printer is
not operated.
The setting range is from 00 to 15 minutes.
Note
This function is disabled if set to 00; the LCD backlight will remain on. For
details, refer to Section 8.4 LCD Power Saving
Setting Range Default Value (dot)
(dot)
00000-20000 20000
00000-18000 18000
00000-09600 09600
00000-09992 09992
00000-14988 14988
Mode.
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
159