SATO S84ex Operator's Manual page 69

SET NAME
Specify a name for the received print data.
Available characters are A to Z, a to z, 0 to 9 and !#$%&'()+-,.;=@[]^_`{}~.
When <space> is entered, the characters after the <space> become
invalid.
Up to 16 characters can be entered, and the default value is "A".
/
Press the buttons to shift the cursor and press the
set the character. Then press the
DATA EXISTS, OVERWRITE?
This screen confirms that you are overwriting a file if you have selected to
save to an existing file name.
Select the following options using the
ENTER button.
• YES: Overwrite the existing file.
• NO: Cancel the overwrite and return to the SET NAME screen.
Note
Make sure that you do not need the existing file before overwriting it.
RECEIVE DATA COPYING. . .
This screen shows that the received data is being copied.
SAVE COMPLETED shows when the received data is fully copied.
Note
Three beeps will sound if the printer fails to copy the received data. The
printer returns to the STANDALONE MODE screen.
SAVE COMPLETED.
This screen shows when the received data is saved to a specified file.
Press the ENTER button to return to the STANDALONE MODE
screen.
/
ENTER button to save the file name.
/
buttons and then press the
4 Operation and Configuration
buttons to
S84-ex/S86-ex Operator Manual
67