SATO S84ex Operator's Manual page 159

PROTOCOL CODE
Set the protocol code.
• STANDARD: Use a standard code.
• NON-STANDARD: Use a non-standard code.
Note
To set the non-standard code, send the user download command <LD> in
normal mode. For more details on the <LD> command, refer to the
Programming Reference.
RIBBON SAVER
Enable or disable the ribbon saver function.
• ENABLE: Use the ribbon saver.
• DISABLE: Do not use the ribbon saver.
Note
Shows only if the optional ribbon saver is installed. The optional ribbon
saver is only available for the S84-ex printer.
For details on the ribbon saver function, refer to
Ribbon Saver.
MODE SELECT
Set the communication command mode for analysis.
• XML: Use for supporting Oracle and SAP mode.
• SBPL: Use SBPL (SATO Barcode Printer Language) for the printer
commands.
Note
The setting will be effective only if you power on the printer again.
JOB MODIFICATION
Set the job modification function.
Use the job modification command <#J> to specify the strings before and
after conversion.
• ENABLE: Enable the job modification function.
• DISABLE: Disable the job modification function.
Section 8.10 Optional
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
157