SATO S84ex Operator's Manual page 175

Chip Manufacture
Set the chip manufacturer of the RFID tag.
• IMPINJ
• ALIEN
• NXP
MCS Prefix
Set the MCS prefix insert method.
• AUTO: Set to the manufacturer prefix selected in Chip Manufacturer.
• MANUAL: Set to the prefix determined by the MCS Prefix Digit and
MCS Prefix Data.
MCS Prefix Digit
Set the number of digits for the MCS prefix.
The setting range is from 0 to 3 digits.
Note
Shows only if MANUAL is selected in the MCS Prefix screen.
MCS Prefix Data
Set the MCS prefix data.
Number of digits to be input is according to the setting of the MCS Prefix
Digit.
Note
Shows only if MANUAL is selected in the MCS Prefix screen.
4 Operation and Configuration
When MCS Prefix Digit is set
as 3DIGIT(S), the printer
shows the screen as follow.
S84-ex/S86-ex Operator Manual
173