SATO S84ex Operator's Manual page 258

6 Cleaning and Performing Printer Adjustments
6
Press the
of sensor to be adjusted and then press the
ENTER button.
The instruction of placing the media shows.
7
Open the top cover and unlock the media
feed and media sensor assembly .
8
Place the media/liner  on the media
sensor.
To adjust the I-mark sensor, place the white area of
media under the media sensor.
To adjust the gap sensor, peel off the label and
place the liner under the media sensor.
9
Press the media feed and media sensor
assembly  down to lock it.
To get the correct adjustment result, perform the
adjustment after you have closed the media sensor
assembly.
10
Press the
sensor adjustment.
256 S84-ex/S86-ex Operator Manual
buttons to select the type
/
ENTER button to start the
When I-MARK is
selected
When GAP is
selected
1
2
Media sensors
area