SATO S84ex Operator's Manual page 154

4 Operation and Configuration
INPUT SIGNAL/OUTPUT SIGNAL
Set the pin number for the input/output signal.
The setting details are as follows:
Signal Name
PRINT START
REPRINT
LABEL NEAR END
FEED
PAPER END
RIBBON END
MACHINE ERROR
PRINT END
ONLINE
RIBBON NEAR END
Note
For details, refer to
Signal.
DECIDE?
Select whether or not to confirm the input/output signal setting.
• YES: Proceed to the UPDATED SETTING screen.
• NO: Returns to the I/O SIGNAL SETTING screen.
152
S84-ex/S86-ex Operator Manual
Input/ Default
Output Pin No.
Input 20
Input 8
Input 7
Input 21
Output 17
Output 16
Output 4
Output 5
Output 6
Output 18
Section 8.5 Input/Output Signal of the External
Overla Available
pping Pin No.
Not Can be set to
Allowed 8 or 20.
Not
Allowed
Not Can be set to
Allowed 7 or 21.
"-": Function
Not
is disabled.
Allowed
Allowed Can be set to
4, 5, 6, 16,
Allowed
17 or 18.
Allowed "-": No output
Not
Allowed
Allowed
Allowed