SATO S84ex Operator's Manual page 229

Note
Firmware download may fail if there is insufficient download area for the emulation modules. Delete the
unnecessary emulation module from the printer memory to free up memory space for the new emulation
module download.
INTERFACE SELECT
Select the download method.
• INTERFACE: Download the emulation module from the interface.
• SD CARD: Download the emulation module from an SD card.
• USB MEMORY: Download the emulation module from a USB memory.
DOWNLOAD READY
The printer is waiting to receive module data using the selected interface,
which set by DATA PORT in the Interface mode menu.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
RECEIVING...
The printer is receiving the module data.
The bar on the lower portion of the screen indicates the data reception
progress.
After receiving the module data, it goes to the WRITING... screen.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
WRITING...
The printer is writing the module data.
The bar on the lower portion of the screen indicates the data writing
progress.
After writing the module data, it goes to the VERIFYING... screen.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
5 Emulation Mode
S84-ex/S86-ex Operator Manual 227