Table of Contents
Advertisement
M
ANAGING THE ADDRESS BOOK
S
ETTING SENDER AND REPLY TO
You can set the E-mail address from which E-mails are sent and the address to which
responses are sent.
1.
Press the SETTING button on the control panel.
2.
Using the Down arrow key, scroll to Admin Setup and then press OK.
3.
Using the arrow keys and on-screen keyboard, enter the administrator password.
NOTE
The default password is "999999".
4.
Select Done and then press OK.
5.
Using the Down arrow key, scroll to Scanner Setup and then press OK.
6.
Using the Down arrow key, scroll to E-mail Setup and then press OK.
7.
Using the Down arrow key, scroll to From/Reply to and then press OK.
8.
Using the Down arrow key, scroll to From or Reply to and then press OK.
9.
Using the on-screen keyboard, enter the E-mail address up to 48 characters.
10.
Select Done and then press OK.
NOTE
You can select E-mail addresses from the address book.
11.
Using the Down arrow key, scroll to Close and then press OK.
12.
Press the RESET/LOGOUT button.
E-
(
MAIL ADDRESSES
FROM
Scanning > 78
/
)
REPLY TO
Advertisement
Table of Contents
