Default Screen; Entering Text Using The Operator Panel - Oki MC361dn User Manual

No.
14 <RIGHT> key
15 <OK> key
16 <BACK> key
17 <CLEAR> key
18 <POWER SAVE> key
19 <DATA IN MEMORY> indicator
20 One touch key pad
21 <JOB MACRO> key 
(for MC561dn only)
22 Qwerty keyboard 
(for MC561dn only)

Default Screen

Turn the power on, and when the machine is in
the state in which it can be used, the Copy Start
screen will be displayed as the default mode.
You can switch to other functions by using the
main function keys.
Reference
 You can change the default screen by pressing the
<SETTING> key on the operator panel and then selecting
[Admin Setup] > [Management] > [Default Mode].
For details, refer to the User's Manual Advanced.
Name
 Proceeds to the next screen.
 Shifts the highlighted selection to the right while an item is
selected or characters are entered.
 Confirms the highlighted item.
 Selects an item to be checked.
Returns to the previous screen.
Executes the following actions according to the entered
 Minimizes a setting value.
 Enters zero for a setting value.
 Clears what is entered.
 Cancels a selected item.
 Enters or exits the power saving mode.
 Exits the sleep mode.
Lights up in green while in the modes.
Lights up when data is in memory.
* Sleep mode does not light up even if data in memory.
Accesses a registered e-mail address or fax number.
8 keys x 2 groups which is 16 entries in total (Press the <SHIFT>
key to switch the groups)
Switches to the job macro screen.
Enters text.
It is under the one touch key pad.
Function
Entering Text Using the
Operator Panel
When you need to enter text while setting an
item, the entry screen shown below appears.
You can enter upper and lower case letters,
numbers and symbols with the screen keyboard.
Memo
 When you need to enter only numbers, the screen
keyboard may not appear. In this case, enter numbers
using the ten-key pad.
- 27 -
Operator Panel
1