Chapter 32 D-Link License Management System (Dlms) Command List - D-Link xStack DGS-3120 Series Cli Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Chapter 32 D-Link License
install dlms activation_code <string 25> {unit <unit_id 1-6>}
show dlms license {unit <unit_id 1-6>}
32-1 install dlms activation_code
Description
This command is used to install an activation code to activate or unlock function on the applicance.
Format
install dlms activation_code <string 25> {unit <unit_id 1-6>}
Parameters
<string 25> - Specify an activation code.
unit - (Optional) Specify the Switch in the switch stack.
<unit_id 1-6> - Enter the unit ID value. This value must be between 1 and 6.
Restrictions
Only Administrator-level users can issue this command.
Example
To install an activation code:
DGS-3120-24TC:admin#install dlms activation_code xBc7vNWsSpchuQkGZsTfPwcfa
Command: install dlms activation_code xBc7vNWsSpchuQkGZsTfPwcfa
Success.
Please reboot the device to active the license.
DGS-3120-24TC:admin#
32-2 show dlms license
Description
This command is used to display license information.
management System (DLMS)
Command List
380