Power Saving; Led State Settings; Power Saving Settings - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Web Status
Web-based management is Enabled by default. If you choose to disable this by clicking
Disabled, you will lose the ability to configure the system through the web interface as soon
as these settings are applied.
Port (1-65535) The TCP port number used for web-based management of the Switch. The "well-known"
TCP port for the Web protocol is 80.
Click the Apply button to accept the changes made.

Power Saving

LED State Settings

This window is used to configure the port LED state.
To view the following window, click Management > Power Saving > LED State Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
LED State Click the radio buttons to enable or disable the port LED state.
Click the Apply button to accept the changes made.

Power Saving Settings

This window allows the user to implement the Switch's built-in power saving features and set the schedule to
enforce the settings.
To view the following window, click Management > Power Saving > Power Saving Settings, as shown below:
Figure 3-50 Web Settings window
Figure 3-51 LED State Settings window
70