Pvid Auto Assign Settings; Vlan Counter Settings (Ri And Ei Mode Only) - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Secondary VLAN Type
Secondary VLAN Name
Secondary VLAN List
Click the Add button to add a new entry based on the information entered.
Click the View Private VLAN List
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

PVID Auto Assign Settings

This window is used to configure the PVID auto assign status.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as shown below:
The fields that can be configured are described below:
Parameter
PVID Auto Assign State
Click the Apply button to accept the changes made.

VLAN Counter Settings (RI and EI Mode Only)

This window is used to view and configure the control entry for VLAN traffic flow statistics.
To view the following window, click L2 Features > VLAN > VLAN Counter Settings, as shown below:
The fields that can be configured are described below:
Description
Use the drop-down menu to select secondary VLAN type between Isolated or
Community.
Enter a secondary VLAN name.
Enter a list of secondary VLAN ID.
link to view all the private VLAN.
Figure 4-16 PVID Auto Assign Settings window
Description
Click to enable or disable the PVID auto assign state. The default setting is
enabled.
Figure 4-17 VLAN Counter Settings window
88