Lldp Dot3 Tlvs Settings - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Dot1 TLV PVID
Dot1 TLV Protocol
VLAN
Dot1 TLV VLAN
Dot1 TLV Protocol
Identity
Click the Apply button to accept the changes made.

LLDP Dot3 TLVs Settings

This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3
organizational specific TLV data type from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as show below:
Figure 4–89 LLDP Dot1 TLVs Settings window
Description
Select the starting and ending ports to use.
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to enable or disable and configure the Dot1 TLV PVID
option.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
VLAN option. After enabling this option to the user can select to use either VLAN
Name, VID List or All in the next drop-down menu. After selecting this, the user
can enter either the VLAN Name or VID List value in the space provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV VLAN
option. After enabling this option to the user can select to use either VLAN Name,
VID List or All in the next drop-down menu. After selecting this, the user can enter
either the VLAN Name or VID List value in the space provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
Identity option. After enabling this option the user can select to either use EAPOL,
LACP, GVRP, STP, or All.
127