Igmp Static Group Settings (Ri Mode Only) - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Key ID (1-255)
Password
Click the Add button to add a new Key ID with its corresponding password.
Click the Find button to search for the Key ID entered.
Click the View All button to view all the entries.
Click the Edit button to re-configure a specific entry listed.
Click the Delete button to remove a specific entry listed.

IGMP Static Group Settings (RI Mode Only)

This window is used to create an IGMP static group on the switch.
To view the following window, click L3 Features > IGMP Static Group Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Interface Enter the IP interface on which the IGMP static group resides. The IP interface must be the
primary IP interface.
Multicast Group Enter the multicast IP address. Tick the All option to use all groups.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove a specific entry listed.
Click the Find button to find the information entered.
Click the View All button to view all the entries.
Figure 5-149 MD5 Settings window
Description
Specifies a number from 1 to 255 used to identify the MD5 key.
Specifies an alphanumeric string of between 1 and 16 case-sensitive characters used
to generate the Message Digest which is in turn, used to authenticate OSPF packets
within the OSPF routing domain.
Figure 5-1509 IGMP Static Group Settings window
254