Telnet Settings; Web Settings - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Trap
RMON Falling Alarm
Trap
Click the Apply button to accept the changes made.

Telnet Settings

Users can configure Telnet Settings on the Switch.
To view the following window, click Management > Telnet Settings, as show below:
The fields that can be configured are described below:
Parameter
Telnet State
Port (1-65535)
Click the Apply button to accept the changes made.

Web Settings

Users can configure the Web settings on the Switch.
To view the following window, click Management > Web Settings, as show below:
The fields that can be configured are described below:
Parameter
Web Status
Port (1-65535)
Click the Apply button to accept the changes made.
Enable this option to use the RMON Falling Alarm Trap Feature.
Figure 3–44 Telnet Settings window
Description
Telnet configuration is Enabled by default. If you do not want to allow configuration of the
system through Telnet choose Disabled.
The TCP port number used for Telnet management of the Switch. The "well-known" TCP
port for the Telnet protocol is 23.
Figure 3–45 Web Settings window
Description
Web-based management is Enabled by default. If you choose to disable this by clicking
Disabled, you will lose the ability to configure the system through the web interface as
soon as these settings are applied.
The TCP port number used for web-based management of the Switch. The "well-known"
TCP port for the Web protocol is 80.
54