Lldp Remote Port Information - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Unit
To view the normal LLDP Local Port information window per port, click the Show Normal button.
After clicking the Show Normal button, the following window will appear:
The fields that can be configured are described below:
Parameter
Unit
Port
Click the Find button to locate a specific entry based on the information entered.
To view more details about, for example, the Management Address Count, click the
To view the brief LLDP Local Port information window per port, click the Show Brief button.
After clicking the Show Detail
Click the <<Back button to return to the previous page.

LLDP Remote Port Information

This window displays port information learned from the neighbors. The switch receives packets from a remote
station but is able to store the information as local.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Remote Port Information, as shown
below:
Description
Select the unit you want to configure. (EI and SI Mode Only)
Figure 4-119 LLDP Local Port Information – Show Normal window
Description
Select the unit you want to configure. (EI and SI Mode Only)
Use the drop-down menu to select a port.
hyperlink under the Management Address Count, the following window will appear:
Figure 4-120 LLDP Local Port Information – Show Detail window
158
Show Detail hyperlink.