Snmp View Table Settings - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.

SNMP View Table Settings

Users can assign views to community strings that define which MIB objects can be accessed by a remote SNMP
manager. The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the
views created in the previous window.
To view the following window, click Management > SNMP Settings > SNMP View Table Settings, as shown
below:
Figure 3-38 SNMP Linkchange Traps Settings window
Description
Select the unit you want to configure. (EI and SI Mode Only)
Select the starting and ending ports to use.
Use the drop-down menu to enable or disable the SNMP link change Trap.
62