Ip Forwarding Table - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
After clicking the Edit button, the following page will appear:
The fields that can be configured are described below:
Parameter
Policy Route Name
Profile ID (1-6)
Access ID (1-256)
Next Hop IPv4 Address
State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.

IP Forwarding Table

The IP forwarding table stores all the direct connected IP information. This window is used to view all the direct
connected IP information. To view the following window, click L3 Features > IP Forwarding Table, as shown
below:
The fields that can be configured are described below:
Parameter
IP Address
Figure 5-15 Policy Route Settings window
Description
Enter a name of no more than 32 alphanumeric characters that will be used to identify
this policy route.
Enter the Profile ID number of the Access Profile, previously created, which will be used
to identify packets as following this Policy Route. This access profile, along with the
access rule, must first be constructed before this policy route can be created.
Enter the Access ID number of the Access Rule, previously created, which will be used
to identify packets as following this Policy Route. This access rule, along with the
access profile, must first be constructed before this policy route can be created.
This is the IP address of the Next Hop router that will have a direct connection to the
Gateway router connected to the Internet.
Use the pull-down menu to enable or disable this Policy Route.
Figure 5-16 IP Forwarding Table
Description
Click the radio button and enter the IP address.
170