Pvid Auto Assign Settings; Voice Vlan - D-Link DGS-3120-24TC Product Manual

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Secondary VLAN Type
Secondary VLAN Name
Secondary VLAN List
Click the Add button to add a new entry based on the information entered.
Click the View Private VLAN List

PVID Auto Assign Settings

Users can enable or disable PVID Auto Assign Status. The default setting is enabled.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below:
Click the Apply button to accept the changes made.

Voice VLAN

Voice VLAN Global Settings
Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will
be deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to
ensure the transmission priority of voice packet is higher than normal traffic.
The switches determine whether a received packet is a voice packet by checking its source MAC address. If the
source MAC addresses of packets comply with the organizationally unique identifier (OUI) addresses configured by
the system, the packets are determined as voice packets and transmitted in voice VLAN.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global Settings, as show
below:
The fields that can be configured are described below:
Description
Use the drop-down menu to select secondary VLAN type between Isolated or
Community.
Enter a secondary VLAN name.
Enter a list of secondary VLAN ID.
link to view all the private VLAN.
Figure 4–16 PVID Auto Assign Settings window
Figure 4–17 Voice VLAN Global Settings window
69