Show Ipif - D-Link xStack DGS-3120 Series Cli Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#disable ipif newone
Command: disable ipif newone
Success.
DGS-3120-24TC:admin#

12-18 show ipif

Description
This command is used to display an IP interface.
Format
show ipif {<ipif_name 12>}
Parameters
ipif_name - Specify the name of the IP interface.
<ipif_name 12> - (Optional) Enter the IP interface name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display an IP interface:
DGS-3120-24TC:admin#show ipif
Command: show ipif
IP Interface
VLAN Name
Interface Admin State
IPv4 Address
Proxy ARP
IP Directed Broadcast
IPv4 State
IPv6 SLAAC state
DHCPv6 Client State
IPv6 State
DHCP Option12 State
DHCP Option12 Host Name
Total Entries: 1
DGS-3120-24TC:admin#
: System
: default
: Enabled
: 10.90.90.90/8 (Manual)
: Disabled (Local : Disabled)
: Disabled
: Enabled
: Disabled (Default Router: Disabled)
: Disabled (Rapid commit : Disabled)
: Enabled
: Disabled
:
167
Primary