Canon GP215 Service Manual page 338

4. MECHANICAL SYSTEM
5. Adjusting the Position of the Mirror (optical length of No. 1 mirror and No.
2/No. 3 mirror)
1) Prepare the mirror positioning tool.
2) Move the No. 1 mirror mount in the forward direction to match the hole in the front upper side plate and
the hole in the slide assembly of the No. 1 mirror mount and the No. 2 mirror mount. (Do the same for
the rear side plate.)
3) Set the mirror positioning tool to the No. 1 mirror mount and the No. 2 mirror mount (both front and
rear).
For rear
No.2/No3 mirror mount
4) Tighten the set screw of the pulley.
5) Remove the tool.
4–12
COPYRIGHT © 1996 CANON INC.
No.1 mirror mount
Figure 4-309
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
For front