Canon GP215 Service Manual page 343

6) Disconnect the connector y, and remove the
vertical path assembly.
5
Figure 4-321
4. Horizontal Registration Motor
1) Remove the following:
• Pick-up unit (p. 4-18)
• Pick-up drive unit (p. 4-15)
• Vertical path unit (p. 4-16)
2) Remove the two screws w, and disconnect
the two connectors e; then, remove the hori-
zontal registration motor q.
1
Figure 4-322
COPYRIGHT © 1996 CANON INC.
6
3
2 3
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
5. Developing Clutch
1) Remove the rear cover (4 screws), flywheel (3
screws), and harness retainer (high-voltage
cord).
2) Remove the two screws, and disconnect the
connector e; then, remove the developing
clutch.
2 3
Figure 4-323
6. Multi Clutch
1) Remove the rear cover (4 screws) and the fly-
wheel (3 screws).
2) Remove the two screws w, and disconnect
the connector e; then, remove the multi
clutch.
1
2
2 3
Figure 4-324
2
1
4–17