Canon GP215 Service Manual page 224

3. OPERATIONS AND TIMING
• Overstacking Alarm (Multitray-12)
Code Nature
02H Overstack
ing of
paper
• Partial Fault Alarm (Multitray-12)
Code Nature
10H Partial
fault
3–170
COPYRIGHT © 1996 CANON INC.
Cause
The paper being Stops upon
stacked during detection over-
multitray operation stacking.
has exceeded the
capacity of a sin-
gle bin.
Cause
An error occurred Prohibits delivery
in the bin unit to the sorter;
feeding motor however, permits
(M2), bin shift delivery to the
motor (M1), guide tray.
bar swing motor
(M4), or stapler
swing motor (M5);
the same type of
error has occurred
after turning off
and on the power.
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
Operation Display
Indicates a mes-
sage on the
copier's control
panel.
Operation Display
No indication.
Resetting
Remove all
paper from the
bin.
Resetting
Remove the
cause of the
error, and turn
off and then on
the power.