Canon GP215 Service Manual page 111

2. Turning ON and OFF the Laser Scanner Motor
The laser scanner motor (M3) starts to rotate differently depending on whether 'time to quiet mode' in
user mode is set to '1–9' or '0'.
If the time is set to '1–9', rotation starts when the following is performed during standby:
q Pressing a key.
w Opening the copyboard cover or the feeder.
e Placing an original in the feeder.
If the time is set to '0', rotation starts when the Copy Start key is pressed.
The laser scanner motor turns OFF as set in 'time to quiet mode'. (If the time is set to '0', the rotation
stops at the end of 'LSTR'.)
Main power
switch ON
Main motor (M1)
Laser scanner motor (M3)
A: With the setting of 'time to quiet mode' in user mode set to a value other than '0', a key on the control
panel is pressed, an original is placed in the feeder, or the copyboard cover is opened.
B: May be varied in user mode (quiet mode); if '0' is set, the period B will be removed.
COPYRIGHT © 1996 CANON INC.
Control panel Copy Start
power switch ON key ON
SLEEP STBY
INTR
A
Figure 3-406
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING
SCFW LSTR STBY
B
3–57