Canon GP215 Service Manual page 252

3. OPERATIONS AND TIMING
2. Primary Charging Roller/Transfer Charging Roller/Developing Bias
Item
PRI DC Indicates the primary charging DC out-
(IMG) put effective when an image is
exposed.
PRI DC Indicates the primary charging DC out-
(no IMG) put between sheets.
DVLP DC Indicates the developing DC output
(IMG) while an image is exposed.
DVLP DC Indicates the developing DC output
(no IMG) between sheets.
TRNS Indicates the transfer charging DC out-
(IMG) put while an image is exposed.
TRNS Indicates the transfer charging DC out-
(no IMG) put between sheets.
PRI AC Indicates the primary charging AC out-
(IMG) put while an image is exposed.
PRI AC Indicates the primary charging AC out-
(no IMG) put between sheets.
3–198
COPYRIGHT © 1996 CANON INC.
*3* ADJUST 02
PRI DC (IMG)
PRI DC (no IMG)
DVLP DC (IMG)
DVLP DC (no IMG) : xxxxx <– (xxxxx)
TRNS (IMG)
TRNS (no IMG)
PRI AC (IMG)
PRI AC (no IMG)
Description
CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
CANCEL
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
: xxxxx <– (xxxxx)
+
–
OK
Remarks
If you have replaced the image
processor PCB, be sure to
enter the value recorded on
the service label.
Settings
0~65535